Software Maintenance
47
Figure 4
TFTP Server Dialog Box
7
Depending on your TFTP server interface, click on the icon or button, such as
Options
in Figure 4 to set the path for the application on your system.
To configure the router:
1
Enter the TFTP configuration status.
2
Boot the router and press N quickly when
Booting
displays on the screen. The
following information displays on the terminal interface:
(M)odify any of router configuration or (C)ontinue? [M]
3
Press
Enter
. The following information displays:
For each of the following questions, you can press <Return> to select
the value shown in braces, or you can Enter a new value.
NETWORK INTERFACE PARAMETERS:
4
Configure the network interface parameters for the router, including the interface
to be used, its IP address, and subnet mask.
Do you want a LAN interface? [N] y
This board's LAN IP address? [169.254.10.10]10.110.10.10
Subnet mask for LAN (0 for none)? [255.255.0.0]
TFTP SERVER PARAMETERS:
Configure the TFTP Server parameters, including IP address of the
Ethernet interface on the PC, file name of the application program,
CPU delay time and so on.
IP address of the TFTP server? [169.254.75.166]
10.110.10.13
What is the name of the file to be loaded and started? [m8241ram.arj]
How long (in seconds) should CPU delay before starting up? [5]
Summary of Contents for Router 3012
Page 6: ...6 CHAPTER ABOUT THIS GUIDE ...
Page 18: ...18 CHAPTER 1 OVERVIEW ...
Page 34: ...34 CHAPTER 3 INSTALLING THE ROUTER ...
