3Com OfficeConnect 56K Business, Command Reference Manual, Page: 161 / 210

Octothorpe (#) Command Set B-13
Octothorpe (#)
Command Set
%Fn Remotely configure another device’s data format.
%F0 No parity, 8 data bits.
%F1 Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
%L= Set a local-access password.
%Pn= Disable password security (n=0 or n=1) when no character follows
the equal sign.
%Pn=s Set the following password (s) for viewing privileges only (n = 0),
or view and configuration privileges (n= 1).
%Pn? Display password n.
%S=n Access the security accounts. Does not disable security.
%T Enable the recognition of tone frequencies of analog dialing
devices.%T is meant primarily for use with network applications,
but may also be integrated into certain software programs. For
example, %T could be used in a security program to identify
incoming tone security codes.
To return the modem to Command mode, press any key or drop
the computer's or terminal's DTR signal. The modem responds OK
%V=PWn Assign the password in account n in your modem’s security
account as your Autopass password
Command Function
Command Function
#$ Display the help panels for the octothorpe (#) command set.
#CID=n Controls the caller ID settings.
#CID=0
Disable caller ID detection and reporting.
#CID=1 Enable caller ID with formatted output.
#CID=2 Enable caller ID with unformatted output.
#CID=3 Enable caller ID with formatted output and name
suppressed.
#CID=4 Enable caller ID but do not transmit the information
to your computer- retain it in the modem’s memory.
#CID? Display the current caller ID settings.
#CID=? Display the caller ID actions that are available.