3Com OfficeConnect 3CR29210, Getting Started Manual, Page: 29 / 54

Wall-Mount Installation 23
Wall-Mount Installation
The bottom panel of the cable modem has two raised
brackets with slots, as shown in the following illustration,
which enable you to mount the cable modem to a wall.
These slots fit over the heads of wall-mounting screws to
secure the cable modem to the wall. A mounting template
for marking the location of the mounting screws is
included at the back of this guide.
1 Remove the mounting template from the back of this
guide.
2 Place the mounting template against the wall at the
location chosen for the cable modem. The template should
be parallel to and at least 50 cm (20 in.) above the floor.
Insert drawing pins through the template cross hairs into
the wall to mark the locations for the screws.
3 Secure the mounting screws into the wall. Do not drive the
screws flush to the wall. The screw heads should be at least
6 mm away from the wall so the screws can lock into the
slots on the cable modem’s case.
4 Fit the slots over the screw heads and let the cable modem
slide down into position.
mounting
holes
®