3Com OfficeConnect 3CR29210, Getting Started Manual, Page: 28 / 54

22 C
HAPTER
2: H
ARDWARE AND
S
OFTWARE
I
NSTALLATION
7 The Found New Hardware Wizard completes the driver
installation. Click
Finish to close the Found New Hardware
Wizard.
8 Verify that the cable modem is operating properly. To do
this, watch the cable modem
Link Status and Power LEDs;
when they are solid green, the cable modem is ready for
use.
If you are powering up the cable modem for the first time,
allow 15 minutes for this process to finish.
Uninstalling the Cable Modem (Windows 2000
Operating System Only)
To uninstall the cable modem while using Windows 2000:
1 Close all open applications.
2 Click Windows Start .
3 Select Settings .
4 Click Control Panel .
5 Double-click Add/Remove Programs. The Add/Remove
Hardware Wizard screen appears.
6 Click Next .
7 Select Uninstall/Unplug a device and click Next .
8 Select Uninstall a device. Choose this option to
permanently uninstall a device and its driver.
9 Click Next .
10 Select 3Com OfficeConnect Cable Modem and click Next.
11 Verify that you have selected 3Com OfficeConnect Cable
Modem then select Yes, I want to uninstall this device.
12 Click Next .
13 Click Finish when Windows informs you that it has
successfully uninstalled the selected device.