Changing Configuration Settings
4-9
Follow these steps to change the configuration settings:
1
Run the installation program described in “Configuring the
NIC” earlier in this chapter.
2
From the main menu (see Figure 4-1), select
Configuration
and Diagnostic Program
.
3
If multiple NICs are installed in the PC, use the arrow keys
to select the NIC you want to configure. Press Tab to move
to the
Select
button and press Enter.
4
Press Tab to display the dialog box, and then select the
option that you want to change. Press Enter.
5
Use the arrow keys to scroll through the list of settings for
that option. Select a setting and press Enter.
6
Continue this procedure for other options. For more
information on a specific option, select the option and
press F1.
7
To save the new settings, select
OK
and press Enter.
Book Page 9 Friday, June 11, 1999 3:02 PM
