Starting the Diagnostic Program
5-7
Starting the Group 3 Test
To run the Group 3 test on a Fast EtherLink EISA adapter,
follow these steps:
1
Start the Configuration and Diagnostic Program.
This program must be on the computer containing the
adapter you want to test.
2
Select
Test Setup
from the
Test
menu.
3
Select
Group 3
from the Group Select box.
4
Enable the
Group 3
test by selecting the
Enable Group
button.
5
Select
OK
and press [Enter].
6
Go to the Run Tests dialog box and select
Start
to start the
tests.
7
After the test is completed:
a
End the program on the echo server.
b
Exit the diagnostic program.
Table 5-1
Non-Bus Master Adapter and Diagnostic Program Names
Diagnostic Program Name
Adapter
3C503
EtherLink II
â
or II TP
EtherLink II/16 or II/16 TP
3C505
EtherLink Plus
â
3C507
EtherLink 16 or EtherLink 16 TP
3C5X9CFG
EtherLink III family
3C523
EtherLink/MC
3C523TP
EtherLink/MC TP
3C527
EtherLink/MC 32
3C59XCFG.EXE
EtherLink III EISA, EtherLink III PCI,
Fast EtherLink PCI, and Fast EtherLink EISA
