4-10
C
HAPTER
4: L
OADING
N
ETWORK
D
RIVERS
2
Select
Configuration/Diagnostic/Troubleshooting
, and
press [Enter].
3
In the next screen, select
Configuration and Diagnostic
Program
, and press [Enter].
The next screen lists the installed adapters. Write down their
slot numbers.
4
Exit the program.
If you are using an ODI driver with multiple adapters already
installed and you have not updated the NET.CFG file, specify
which adapter you want the driver to recognize by adding
the slot number to the NET.CFG file using the SLOT XXXX
parameter, where XXXX is the slot number.
One EISA Adapter in a Server
If you are running NetWare and have installed a single adapter in
an EISA computer that is functioning as a server, follow the
instructions in this section to install the NetWare 4.x server driver.
The 3C59X
EtherDisk
diskette contains a NetWare 4.x server
driver (3C59X.LAN) and the NetWare Loadable Modules
(NLMs) that enable the NetWare 4.x driver to be used with
NetWare 3.11, 3.12, or 4.0x software. These files are found in
the \NETWARE\SERVER subdirectory.
NetWare Driver Installation
To install the 4.x server driver, follow these steps:
1
Copy the contents of the appropriate \NETWARE\SERVER
subdirectory to the boot partition of the server‘s hard disk.
The 3C59X
EtherDisk
diskette contains the NetWare 4.x server
driver and the NetWare Loadable Modules (NLMs) that
enable the NetWare 4.x driver to be used with NetWare 3.11,
3.12, 4.0x, or 4.1 software.
