manualshive.com logo in svg

3Com CT1, Release Note, Page: 6 / 7

Share
Download
3Com CT1 Release Note Download Page 6

 

6

You may set parameters of HWPing operations, and view the statistics of these 
operations using the following CLI commands: 
 

hwping-server enable 
undo hwping-server enable 
hwping-server udpecho ip-address port-num 
undo hwping-server udpecho ip-address port-num 
hwping-server tcpconnect ip-address port-num 
undo hwping-server tcpconnect ip-address port-num 
hwping-agent enable 
undo hwping-agent enable 
hwping administrator-name operation- tag 
undo hwping administrator-name operation-tag 
destination-ip ipaddress 
undo destination-ip 
destination-port port-number 
undo destination-port 
source-interface interface-type interface-number 
undo source-interface 
source-ip ipaddress 
undo source-ip 
source-port port-number 
undo source-port 
testtype { icmpecho | udp-public | udp-private | tcp-public | tcp-private | dlsw | 

dhcp | snmpquery | ftp | http } 

count times 
undo count times 
datasize size 
undo datasize 
frequency interval 
undo frequency 
timeout time 
undo timeout 
ttl number 
undo ttl 
tos value 
undo tos 
datafill string 
undo datafill 
http-operationtype { get | post } 
http-string url-string 
undo http-string 
ftp-operationtype { get | put } 
username name 
undo username 
password password 

http://www.3com.com/ 
Part No.

 10014533

 

Published August 2004 

Summary of Contents for CT1








Reviews:

No comments