1-14
C
HAPTER
1: O
VERVIEW
Figure 1-9
Switch-Fuseholder-Receptacle Assembly
The autoranging power supply automatically adjusts to the local power
source. You do not have to select the appropriate voltage.
Cutouts in the power supply enclosure reveal a fan inside. The fan opening
serves as an air exhaust vent.
The single fuse is mounted in a removable cartridge. Refer to Chapter 5,
“Maintenance and Upgrades,” for information about changing fuses.
The international CEE-22 AC power cord receptacle is approved for 6 A
operation. The connector has three prongs, with chassis ground on the
middle prong. All servers are shipped with power cords. If your power cord
does not match your requirements, contact your network supplier.
Optional Rack
Mount Kit
An optional rack mount kit is available for CS/3000 series servers (3Com part
number 3C759). This kit allows you to mount the server in a two- or
four-pole 19-inch rack.
For information on how to install the server in a rack, refer to Chapter 2,
“Installation.”
Specifications
Table 1-5 lists physical dimensions of CS/3000 series servers. The dimensions
for Models CS/3000 and CS/3100 are the same except for weight (because
of the diskette drive).
Fuseholder
cartridge
AC power switch
Power cord
receptacle
CS3000BookFile Page 14 Tuesday, October 15, 1996 5:12 PM
