3Com CoreBuilder 3500, Command Reference Manual

Page: 705 / 784

qos classifier modify 705
Nonflow Classifier Procedure
1 To modify the cast type, enter a new cast type.
For a nonflow classifier, the options are
unicast
,
multicast
,
broadcast
, and
all
2
To modify the associated protocols, enter another protocol.
The options are
TCP/IP
,
IP, IPX, Appletalk
,
any,
or
custom
.
3 If you choose
custom,
select the protocol type (
ethernet or
DSAP/SSAP
).
■
For the
ethernet
type, enter the hexidecimal value
■
For the
DSAP/SSAP
type, enter the DSAP and SSAP hexidecimal
values
4 To modify the handling of IEEE 802.1p tags, enter the appropriate tags
using a value in the range of
0
through
7
, or enter
all
QoS Classifier Modify Example (Flow Classifier)
Select menu option (qos/classifier): modify
Enter classifier number
{20,23,26,401-407,420,430,440, 450, 460, 470,480,490|?}:26
Enter classifier name {?} [IPFilter1]:
Select cast type (unicast,multicast|all|?)
[unicast,multicast]:
Select IP protocol type (TCP,UDP|all|?) [TCP,UDP]:
Enter source IP address [168.20.30.0]:
Enter source IP address mask [255.255.0.0]:
Enter destination IP address [192.1.1.0]:
Enter destination IP address mask [255.255.255.0]:
Enter start of TCP source port range (0-65535) [0]:
Enter end of TCP source port range (0-65535) [65535]:
Enter start of TCP destination port range (0-65535) [0]:
Enter end of TCP destination port range (0-65535) [65535]:
Enter another filter (yes,no) [no]: n