manualshive.com logo in svg

3Com CoreBuilder 3500, Command Reference Manual

Share
Download
3Com CoreBuilder 3500 Command Reference Manual Download Page 210

210

C

HAPTER

 7: E

THERNET

 P

ORTS

rxByteRate

Average number of bytes received per second by this port 
during the most recent sampling period.

rxBytes

Number of bytes received by this port, including framing 
characters.

rxDiscards
(3500 and 9000 
Layer 3)

Number of received frames that were discarded because there 
was no higher layer to receive them or because the port was 
disabled.

rxFrameRate

Average number of frames that were received per second by 
this port during the most recent sampling period. Sampling 
periods are 1 second long and not configurable.

rxFrames

Number of frames that were copied into receive buffers by this 
port.

rxInternalErrs

Number of frames that were discarded because of an internal 
error during reception.

rxMcastsOnly
(3900, 9000 
Layer 2, 9300 and 
9400)

Number of multicast frames received by this port.

rxMulticasts

Number of multicast frames that were delivered to a 
higher-level protocol or application by this port.

rxPeakByteRate

Peak value of ethernetPortByteReceiveRate for this port since 
the station was last initialized.

rxPeakFrameRate

Peak value of ethernetPortFrameReceiveRate for this port since 
the station was last initialized.

rxUnicasts

Number of unicast (nonmulticast) frames that were delivered by 
this port to a higher-level protocol or application.

singleCollision
(3500, 3900 and 
9000)

Number of frames that have experienced only one collision 
before successful transmission from this port on the second 
attempt.

slot:port
(9000)

Module slot and port number.

txBroadcasts
(3900, 9000 
Layer 2, 9300 and 
9400)

Number of frames that were queued for transmission from this 
port by a higher-level protocol or application, including frames 
not transmitted successfully.

txByteRate

Average number of bytes that were transmitted per second by 
this port during the most recent sampling period.

txBytes

Number of bytes that were transmitted by this port, including 
framing characters.

txDiscards

Number of transmitted frames that were discarded because the 
port was disabled.

Field

Description

Summary of Contents for CoreBuilder 3500

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands