Installing the Network Driver
3-11
11
Click
Yes
if you want the 3Com driver installed on the
indicated NIC. Otherwise, click
No
.
If you click
Yes
, the NIC Mode
dialog box appears, as shown in
Figure 3-6. If you click
No
, the NIC Installation dialog box
reappears for the next discovered ATMLink NIC.
To correlate the PCI bus and slot number with a physical NIC,
run the 3Com ATMLink diagnostic utility.
Figure 3-6
NIC Mode Dialog Box
12
Click
Active
to make the identified NIC an active NIC, or click
Stand-by
to make it a standby NIC (resilient server link).
■
If you select
Stand-by
, the NIC Installation dialog box
reappears for the next discovered 3C975 ATMLink NIC.
■
If you select
Active
, the Total Number of ELANs dialog box
appears, as shown in Figure 3-7.
Figure 3-7
Total Number of ELANs Dialog Box
13
Enter the number of ELANs you require on the indicated
NIC, and
click
OK
.
The maximum number of ELANs per NIC is 16.
