Driver Installation Summary for Experienced Users
3-7
Part Two: NIC and ELAN Configuration
After all the 3Com ATMLink NICs have been detected, the
driver files copied, and the number of ELANs specified, the
3Com ATMLink Installation window appears.
1
For each installed 3Com ATMLink NIC, set the following
global NIC parameters (these are the same for all NICs in
the system):
■
VPI/VCI Range
■
Signaling Version
2
For each installed 3Com ATMLink NIC, set the following local
NIC parameters (these can vary with each NIC in the system):
■
LAN Type
■
ILMI VPI/VCI
■
Maximum Frame Size
■
Resilient Server Links
All of the above parameters except resilient link assignments
must match the ATM switch settings. The default values work
for most installations.
3
For each ELAN, set the following parameters:
■
ELAN Name
■
Peak Rate
■
LE Configuration Mode
4
Click
Save & Exit
in the 3Com ATMLink Installation window.
5
Click
OK
in the Network Settings window.
6
Configure the IP parameters for each ELAN if IP is used.
Enter dummy IP values for each standby NIC.
7
Restart Microsoft Windows NT.
