2
LED
Color
State
Description
Off
The wireless link is not initialized or the link is
faulty.
Blinking
slowly
The wireless link is working normally.
2.4G
(Wireless
link LED)
Green
Blinking
rapidly
Data is being transmitted or received.
Off
The wireless link is not initialized or the link is
faulty.
Blinking
slowly
The wireless link is working normally.
5G
(Wireless
link LED)
Green
Blinking
rapidly
Data is being transmitted or received.
Interfaces
The AP9152 provides a console interface and an Ethernet interface.
Note:
The AP9152 provides a reset button and a security slot.
Descriptions of the interfaces on the AP9152:
Interface
silkscreen
Standards and
protocols
Description
CONSOLE RS/EIA-232
The console interface is used for device
configuration and management.
Default: 9600 baud rate, 8 data bits, no parity,
one stop bit.
The default username and password for
console login are
admin
and
password
(case
sensitive) respectively
ETHERNET
IEEE802.3
IEEE802.3u
IEEE802.3af
The Ethernet interface can serve as an uplink
interface to access the Internet and as a PoE
interface at the same time.
Caution:
When connecting a cable to an interface, pay attention to the interface
silkscreen to avoid connection mistakes.
2 Preparing for Installation
Unpacking and Inspection
Before unpacking the unit, make sure that the package is intact, without any sign of
damage. When unpacking the unit, avoid excessive force; otherwise, the unit inside the
package may get damaged.
After unpacking the unit, check that all items listed on the packing list are contained. If
any of the items are missing, contact your local dealer immediately.
