background image

Using the Configuration Management System 21

Installing the

Management Device on

a Computer

The device manager can be installed on a third party wireless client or on a

desktop computer wired to the LAN.

1 Turn on the computer.
2 Put the 3Com Administrator Utilities CD in the CD-ROM drive.
3 In the main screen, click Tools and Utilities.
4 In the next screen, click Install the Administration Tool.
5 Follow the instructions on the screens to complete the installation.
6 After you install it, you can launch the tool by double-clicking the 3Com access

point Management icon on your computer desktop, or, from the Windows Start

menu select Start/Programs/3Com 11 Mbps Wireless LAN Administrator

Utilities/3Com access point Management .

The Wireless Network Tree appears in the Wireless Infrastructure Device Manager

window.

Using the

Configuration

Management System

The Configuration Management System lets you view and modify the

configuration settings on individual access points one device at a time.

The software is viewed on your browser (Internet Explorer 5 or higher or Netscape

Communicator 6 or higher) as a hierarchical structure of web pages. The left-hand

frame contains a navigation tree. You may select which page to view by clicking

on the page names in the navigation tree. The corresponding pages are displayed

in the right frame of the window.

The Configuration Management System is password protected. If you are starting

it for the first time, it asks you to enter and confirm an administrative password.

Otherwise, it prompts for the current administration password. You can change

the administrative password from the Change Administrative Password page

under Tools (see “Change Administration Password” on page 27).

NOTE: Any changes you make on any of the configuration pages must be saved

before you leave the page. Otherwise, the settings will revert back to the current

settings. New settings are applied to the device as each save operation is

completed.

Each page has a question mark icon in the upper right corner that you can use to

find help on the contents of that page.

System Configuration

The system configuration parameters are concerned with high-level network

management, including:

Access point properties

Network properties

Data transmission properties

Summary of Contents for 8000





















































Reviews: