3Com 4210G Series, Getting Started Manual

Page: 57 / 78

4-6
Creation date : May 18 2009, 17:01:57
CPU Clock Speed : 264MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 001cc5bc3111
Press Ctrl-B to enter Boot Menu... 1
The last line asks whether you want to enter the Boot Menu. The system waits one second for your
response.
z
The system has two startup modes: normal startup and fast startup. The normal startup mode
takes a little longer time than the fast startup mode because of more self-test operations.
z
By default, the system starts up in fast startup mode and the waiting time here is one second. If you
set the startup mode to normal, this waiting time is five seconds. For the setting of the startup mode,
refer to the section
Changing the Startup Mode .
z
If you press
Ctrl
+
B
within 1 second, the system displays:
Password :
Enter the correct Boot ROM password and click
Enter
to enter the Boot Menu. By default, no password
is set and you can click
Enter
directly to enter the Boot Menu.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4-2 describes the fields above.
Table 4-2
Description on the fields
Item Description
1. Download application file to flash Download the application file to the flash memory
2. Select application file to boot Select the application file to boot
3. Display all files in flash Display all files in the flash memory