1-5
Switch 4210G PWR 24-Port
Front Panel
Figure 1-5
Front panel of the Switch 4210G PWR 24-Port Ethernet switch
(1) 10/100/1000 Base-T auto-sensing Ethernet port
(2) 10/100/1000 Base-T auto-sensing Ethernet port status LED
(3) 1000 Base-X SFP port
(4) 1000Base-X SFP port status LED
(5) Console port
(6) Seven-segment LED
(7) Port mode LED (Mode)
(8) System status LED (PWR)
(9) RPS status LED (RPS)
(10) Interface module 1 status LED (MOD1)
(11) Interface module 2 status LED (MOD2)
(12) Port status LED mode switching button
Rear Panel
Figure 1-6
Rear panel of the Switch 4210G PWR 24-Port Ethernet switch
(1) RPS power input
(2) AC power input
(3) Grounding screw
(4) Interface module slot 1 (MOD1)
(5) Interface module slot 2 (MOD2)
The Switch 4210G PWR 24-Port provides two interface module slots on its rear panel. Each slot is
installed with a filler panel when the switch is shipped. You can select one or two interface modules for
your switch as needed. See
on page
for the interface module models
supported by the Switch 4210G, and see
on page
installation of interface modules.
