4-Port Gigabit Ethernet Layer 3 Switching Module (GBIC) Quick Start Guide
29
Administration Console Management
The Administration Console is a menu-driven, VT100 command line
interface. To access the module’s Administration Console, you must first
log in to the primary EME. Follow these steps:
1
Log in to the EME via Telnet or a local connection.
For information about logging in to the EME, see the
CoreBuilder 9000
Enterprise Management Engine User Guide
.
2
At the EME prompt, enter:
connect <slot>.1
Where
<slot>
is the slot number of the module that you want to
manage, and the number after the period is a subslot number (which is
always 1).
This command brings you to the top-level menu and a prompt. The
prompt shows the slot to which you are connected as well as an
abbreviated description of the module. For example, if you install your
4-port Gigabit Ethernet Layer 3 Switching Module (GBIC) in slot 4, then
the prompt is:
[email protected] [4-GEN-GBIC-L3] ():
3
Enter commands to manage the module.
For example, to display a summary configuration of bridge ports, enter:
bridge port summary
For more information about Administration Console commands, see the
Command Reference Guide
.
Web Management Access
Web Management applications are an embedded part of the
CoreBuilder 9000 system software image. They include WebConsole,
DeviceView, and Performance Monitoring tools. Also available is a Help
system. After you have set up the IP address for the CoreBuilder 9000
system, you can access the Web Management applications directly by
entering its IP address in your Web browser.
See the
Web Management User Guide for the CoreBuilder 9000
Enterprise Switch
for additional information about Web Management.
Summary of Contents for 3CB9RG4
Page 32: ......
