6
Novell NetWare Driver Setup
60
# Note: The Time zone information mentioned above
# should always precede the SERVER name.
Set Bindery Context = 3Com
file server name GOBRCM
ipx internal net 1234ABCD
load conlog maximum=100
; Network driver LOADs and BINDs are initiated via
; INITSYS.NCF. The actual LOAD and BIND commands
; are contained in INITSYS.NCF and NETINFO.CFG.
; These files are in SYS:ETC.
#sys:etc\initsys.ncf
# Team of 2 NICs with frame type Ethernet_II and one VLAN,
number 2
# Load the network drivers for the NIC adapters in the team with
the frame
# types and VLANs specified.
#Load BASP.LAN with the same frame types and VLAN ID(s)
specified.
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1
VLAN=2
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_V2_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_V2_EII SLOT=2
# Bind BASP.LAN to the NIC adapters in the team for each
protocol
BASP BIND BASP_1_V2_EII B57_1_V2_EII
BASP BIND BASP_1_V2_EII B57_2_V2_EII
#Bind protocols to BASP.LAN.
BIND IP BASP_1_V2_EII ADDR=192.168.2.200 MASK=255.255.255.0
Example 2:
# Team of 2 NICs with frame type Ethernet_II and three VLANs,
number 2,3,4
# Load the network drivers for the NIC adapters in the team with
the frame
# types and VLANs specified.
#Load BASP.LAN with the same frame types and VLAN ID(s)
specified.
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1
VLAN=2
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V3_EII VSLOT=1
