3Com 3C17304A Getting Started Manual Download Page 49 | Manualshive

Page: 49 / 84

background image

Setting Up SNMP Management

49

For the browser to operate the web interface correctly, JavaScript™ and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings.

Web Management

Over the Network

To manage a Switch using the web interface over an IP network:

1

Check that you have the IP protocol correctly installed on your
management workstation. You can check this by trying to browse the
World Wide Web. If you can browse, the IP protocol is installed.

2

Check you can communicate with the Switch by entering a

ping

command at the DOS prompt in the following format:

c:\ ping xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If you get an error message, check that your IP information has been
entered correctly and the Switch is powered up.

3

Open your web browser and enter the IP address of the Switch that you
wish to manage in the URL locator, for example, in the following format:

http://xxx.xxx.xxx.xxx

4

At the login and password prompts, enter

admin

as your user name and

press Return at the password prompt (or the password of your choice if
you have already modified the default passwords).

5

Click on the

Device View

button to display the web management options.

Setting Up SNMP
Management

Any network management application running the Simple Network
Management Protocol (SNMP) can manage a Switch if:

■

The correct Management Information Bases (MIBs) are installed on the
management workstation.

■

The management workstation is connected to the Switch using a port
in VLAN 1 (the Default VLAN). By default, all ports on the Switch are in
VLAN 1.

You can use the 3Com Network Supervisor application that is provided on
the CD-ROM that accompanies your Switch to provide SNMP
management for your Switch. If you use 3Com Network Supervisor it
automatically loads the correct MIBs and necessary files onto your
workstation.

DUA1730-0AAA04.book Page 49 Thursday, November 17, 2005 2:59 PM

«
...
47
48
49
50
51
...
»

Summary of Contents for 3C17304A





















































































Reviews:

No comments

Related manuals for 3C17304A

Baseline 2226 Plus

Brand: 3Com Pages: 4

Brand: AAVARA Pages: 23

Brand: G&D Pages: 36

Brand: S&C Pages: 28

Brand: S&C Pages: 12

Brand: S&C Pages: 24

Brand: S&C Pages: 24

Brand: S&C Pages: 24

Brand: S&C Pages: 28

Brand: S&C Pages: 37

Brand: 6TL Pages: 25

Brand: vantiva Pages: 58

Brand: Black Box Pages: 26

Brand: DANLERS Pages: 2

Brand: Cudy Pages: 2

Brand: Waters Network Systems Pages: 12

STI Echotel 919

Brand: Magnetrol Pages: 12

Brand: PhD Solutions Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands