Methods of Managing a Switch
45
prompt enter
all
. A summary of the automatically allocated IP
information is displayed. Make a note of the Network IP Address.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See
“Methods of
Managing a Switch”
on
page 45
.
If you do not intend to use the command line interface via the console
port to manage the Switch, you can disconnect the serial cable and close
the terminal emulator software.
Methods of
Managing a Switch
Once you have completed the initial set up of your Switch, you can
decide how you wish to manage the Switch. You can use one of the
following methods:
■
Command line interface management
■
Web interface management
■
SNMP management
Command Line
Interface
Management
Each Switch has a command line interface (CLI) that allows you to
manage the Switch from a workstation, either locally via a console port
connection (see
Figure 15
), or remotely over the network (see
Figure 16
).
DUA1730-0AAA04.book Page 45 Thursday, November 17, 2005 2:59 PM
Summary of Contents for 3C17304A
Page 6: ...DUA1730 0AAA04 book Page 6 Thursday November 17 2005 2 59 PM ...
Page 58: ...58 CHAPTER 4 PROBLEM SOLVING DUA1730 0AAA04 book Page 58 Thursday November 17 2005 2 59 PM ...
Page 70: ...70 APPENDIX B PIN OUTS DUA1730 0AAA04 book Page 70 Thursday November 17 2005 2 59 PM ...
Page 84: ...DUA1730 0AAA04 book Page 84 Thursday November 17 2005 2 59 PM ...
