manualshive.com logo in svg

3Com 3C10122 - NBX Business Telephone, Installation Manual, Page: 163 / 252

Share
Download
3Com 3C10122 - NBX Business Telephone Installation Manual Download Page 163

9

3C

OM

 L

EGACY

 L

INK

 C

ARDS

The 3Com Legacy Link Cards enable you to use existing Meridian, 
Norstar, or analog telephones with an NBX system. Each card supports up 
to 16 handsets using the existing telephone wiring, punchdown blocks, 
and connectors.

3Com offers these Legacy Link Cards

■

3Com Legacy Link Analog Card

■

3Com Legacy Link Meridian Card

■

3Com Legacy Link Norstar Card

3Com Legacy Link Cards are not compatible with an NBX system that has 
been SIP-enabled.

3Com Legacy Link 
Analog Card

The 3Com Legacy Link Analog Card fits into an available slot in an NBX 
chassis. It translates the analog handset protocol to a format suitable for 
use with an NBX system.

The telephone features available through a connected analog handset are 
as described in the 

NBX Feature Codes Guide for Analog Handsets 

subject 

to the analog phone capability. For example, paging requires an on-hook 
speaker capability that might not be available on an analog phone. 

No additional power is required for the phones. The analog phones are 
line powered from the 3Com Legacy Link Analog Card.

Legacy Link Analog Card Installation Notes

■

Legacy Link Cards require NBX system software version R4.1.6 or 
higher.

■

You must install a license on your NBX system before the system will 
recognize Legacy Link Cards. See 

“NBX Licensing”

 on 

page 59

 for 

Summary of Contents for 3C10122 - NBX Business Telephone





























































































































































































































































Reviews:

No comments