3Brain BioCAM X, User Manual

Page: 31 / 45

31
6. Click Record
to start recording.
A bar indicates the progress of
the recording
7. Wait for the set
time or click Stop
to
finish recording.
4. Click browse
button
to choose the recording
destination path.
5. Choose the
Length
of the experiment to
record.
Record live data
Complete the steps to “Visualize live data” and then:
4. Click the browse button on the Info panel to choose the path where to save your data. Be aware that
to safely record from high resolution MEA you need high performance hard disks. Hence, browse to
a file located either on a high-end disk (e.g., SSD; solid-state drive) or on a disk pool configured with
RAID 0 ( striping ). If your order included a pre-configured host PC, the disk partition where you should
record your file is typically labeled with LiveRec or RAID0. Once you chose the path, by default Brain -
Wave X selects for you the file name, but you can modify this by typing in the Name field.
5. Choose the length of the experiment you want to record by bearing in mind that the experiment will
last this duration or shorter but not longer.
6. Click the Record button in the Commands panel to start recording. In the Progress panel you can see
the elapsed and remaining time of the recording.
7. Wait until the set experiment length or click the Stop button at any time to finish recording. The re -
corded file is a BRW-file located at the position you selected in step 4.