The
Multi-Product
function enables the possibility to load up to 10 different products on
the same truck.
By default; this function is disabled to keep the software 100% compatible with the
previous version; so the operator can continue to work as usual:
The system memorizes all the material loaded at the end of the truck load: when
“delete total” is pressed actual total weight is stored in the total of the product
selected in this moment. Nothing happens if the operator changes the product
selected in the middle of the truck load.
Enabling the Multi-Product function:
The operator can load on the same truck different materials. See this example:
1)
Select as usual the first material to load (GRAVEL) and start to fill the truck
2)
After one or more buckets the operator is free to select another material (MIXED)
and start to load this material.
3)
When the quantity of the second material is enough the operator can select a third
material to load or return to the first (GRAVEL in this example) continuing from the
previous value of load reached.
If you have used the Multi-Product function during the load of a truck you can see in
the printer ticket the total truck load as usual and the single load of each material.
The system memorizes these data at the end of the truck load as usual (“delete
total”) keeping the correct load for every material.
14
Top Master
User Manual
Tare
Disable
Count DW
Machine
Use IR
MultiProduct
Correction 100
Time Setting
Multi-Product/Multi-Truck function
To use this function you must have the Dispenser option to proceed as follows: Press and
release the
UTILITY pushbutton
. The display looks as below
Press and release the
UP or DOWN pushbutton
to scroll to the
MultiProduct
line.
