Centurion Hybrid Installation Manual V2.1.21
Page 8
© 360 Vision Technology Ltd.
Analogue Camera output
Use BNC 1 for the analogue camera output.
Power Connections
Connect 24Vac to CON5.
Ethernet Connections
Connect Ethernet cable to HD HMA Centurion connection
board using a RJ45 connector (CON4).
RS485 Connection
Use CON7 to connect the RS485 twisted pair data to the
Centurion Hybrid..
Please make sure there is adequate spare cable for when the camera is resting on the lanyard, failure to do this
could damage the connector circuit board.