Centurion Hybrid Installation Manual V2.1.21
Page 37
© 360 Vision Technology Ltd.
16 Storage and Handling
Centurions should be handled with care and must not be dropped. When Centurions are inside the transit
packaging which is used for despatch from the factory, they should not be stacked to a height of more than two
Centurions.
When Centurions are being stored before installation they should be kept in the transit packaging and located
in a dry indoor environment preferably between 1°C and 35°C which is dry and dust free. Humidity should such
that water vapour is non-condensing. Centurions can be allowed to be outside this range for short periods of
time (24 hours maximum) for transport (e.g. in aircraft or vans) but must never be allowed to be outside the
normal operating temperature range of -40°C to +60°C even during storage.
Before installation the Centurion should be clean and dry. (If necessary it should be cleaned and dried taking
care that the glass is not scratched).
17 Warranty
This information and/or any technical information – whether received verbally or writing – is given in good faith
but without warranty and this also applies where proprietary rights of third parties are involved. The information
provided does not release you from your obligation to check its validity and to test the products suitability for
the intended purpose(s) and use(s). The application, use and installation of the products either in isolation or in
conjunction with other products used, provided and installed by you on the basis of the technical advice issued
are beyond our control and therefore remain entirely your own responsibility.
©2015 ALL DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
18 PSU Enclosure
Material
PC/ABS
Dimensions (CENTHYB-PSU-SM enclosure)
255 x 180 x 100mm
