Systems Configuration
87
Output Configuration
Select a channel from the dropdown menu. For Channel 1, select the
Output
tab.
To accept changes made to the configuration dialog box, click
Apply
. Click
OK
to accept
changes and close the configuration dialog window. Click
Cancel
to close the window and
discard any changes. Changes to the SC/H Phase are effective immediately. Changes to the
Audio Delay will be effective when the clip is reloaded.
Figure 20: Channel Output Configuration Window
SC/H Phase
Adjusts the Sub-Carrier/Horizontal phase relationship. Use a vector scope to view the phase
relationship and adjust the setting. Changes to the setting are effective immediately without
clicking Apply or OK. The adjustment range is
±
90
°
.
Audio Delay
Audio timing relative to picture output can be configured for audio channels 1-2
and 3-4. The value is set in millisecond increments, plus-or-minus 1,000ms (up to 1
second). The setting is applied to a clip when it is loaded for playback.
Summary of Contents for MAXX
Page 1: ......
Page 48: ...46 Basic Operations Page intentionally left blank ...
