2Wire Gateway User Manual Download

Page: 63 / 131

Management and Diagnostic Console

Note:

The contents of the Components list varies according to service provider-specific information. For

example, the Components list may contain language files (such as common_en, common_es, or
common_fr); user interface files (such as base_ui); or VoIP files (such as base_voice).

Hardware Version

2Wire gateway hardware version.

Hardware Options

The type of peripheral device installed.

DSL Modem Type

ADSL or ISDN.

Current Software

2Wire gateway software version.

Configuration

Key Code

The key code associated with the current provi-
sioning settings. The value is Unprovisioned if
the 2Wire gateway has not yet been provi-
sioned.

System Time

The day, month, year, and time; or “Retrieving
date and time settings from Internet” if not set.

Time Since Last Boot

The time elapsed since the 2Wire gateway was
last restarted.

Last ID Post

The time elapsed since the 2Wire gateway com-
municated with the configuration server.

Components

DSL Modem

DSL modem software version.

Firewall Rules

Current version of the installed firewall rules
database.

Application List

Current version of the application list.

Item

Description

Summary of Contents for Gateway




































































































































Search results

Summary of Contents for Gateway

Reviews:

Related manuals for Gateway

Brands by name

Popular brands

2Wire Gateway, User Manual

Search results

Summary of Contents for Gateway

Reviews:

Related manuals for Gateway

Brands by name

Popular brands