2Wire Gateway User Manual Download

Page: 106 / 131

Management and Diagnostic Console

100

Advanced - Syslog Settings Page

The Advanced - Syslog Settings page allows users to maintain a history of security events greater than the
capacity of the 2Wire gateway by enabling a syslog server.

Note:

Use of this feature requires a UNIX or Linux computer running a syslog daemon.

Figure 45.

MDC Advanced Syslog Settings Page

To enable syslog and specify the location of a syslog server:

Check the

Enable Syslog

checkbox.

In the Server Location field, enter the IP address of a UNIX or Linux computer running a syslog daemon.

Optional:

In the Server Port field, enter the outbound port number upon which the syslog server is

located.

To limit the number of log packets, check the

Enable Throttling

checkbox.

In the Limit Logging to field, enter the number of logs per second that you wish to log.

Click the

Submit

button.

Summary of Contents for Gateway




































































































































Search results

Summary of Contents for Gateway

Reviews:

Related manuals for Gateway

Brands by name

Popular brands

2Wire Gateway, User Manual

Search results

Summary of Contents for Gateway

Reviews:

Related manuals for Gateway

Brands by name

Popular brands