14
5.
Put the HDD bracket back, and make sure to fasten the screws firmly.
6.
Put the hot-swap HDD tray back.
Install Hot-Swap HDD
：
：
：
：
1.
Slightly press the blue plastic tenon (joint) downward, and the silver shaft will spring out.
2.
Pull the silver shaft forward slightly to the end, and the hot-swap tray will slide a bit.
3.
Hold the silver shaft, and pull the whole hot-swap tray out of case.
4.
Install SATA HDD into the Hot-swap tray, and use screws to tighten it.
5.
Insert the hot-swap tray into the case, and push to the end.
