31
8.5 POST-RECORD TIME
Specifies how long the system should record once motion is detected. (OFF / 5~60 sec)
If further motion is detected on the same channel during Motion recording, the system will
extend the recording time until no further motion is detected.
An example is provided below (
Post-Record Time
set to
20 sec
)
8.6 BUZZER TIME
This specifies how long the buzzer will be turned on for when motion is detected (OFF/
5~60 sec)
8.7 ALARM TIME
This specifies how long the alarm will be turned on when motion is detected
(OFF/ 5~60
sec)
8.8 MOTION TRACE
Enable or disable the motion detection tracing grid
Motion 1
Trigger 1
20 sec
When motion is detected, recording
starts. If no further motion is detected in
the next 20 seconds, recording ends.
File length is 20 sec.
When
motion
is
detected,
recording starts. If further motion
is detected after 10 seconds,
continue recording. If no further
motion is detected in the next 20
seconds, recording ends. File
length is 30 sec.
Motion 1
Motion 2
Trigger 1 Trigger 2
10 sec
20 sec
