2N SpeedRoute User Manual Download Page 77

Page: 77 / 101

Table of Programmable Parameters

3.2

Configuration

Operation

This choice enables import/export of 2N ® SpeedRoute settings or SMS database.

The operation is done after clicking on the Save button placed right bottom on the

screen.

File to import

Select path to the file with configuration or SMS database.

Licence

FW version

Current firmware version used by the gateway.

FW date

Date of issue of the current firmware version used by the gateway.

Serial

Gateway serial number.

Parameters

Information on the hardware parameters. Individual parameters are separated

with a comma.

Parameters:

Signals the use of hardware with two WiFi antennas.

LAN MAC

MAC address of the LAN interface.

WAN MAC

MAC address of the WAN interface. Available only if the WAN port is active.

WiFi MAC

MAC address of the WiFi interface.

IMEI

IMEI (International Mobile Equipment Identity) is a unique identification code for

gateway GSM modules.

IMSI lock

MSI (International Mobile Subscriber Identity) is a unique identification code for

SIM cards. Using the IMSI lock, the gateway locks a selected SIM card, rejecting

the other ones.

Summary of Contents for SpeedRoute






































































































Search results

Summary of Contents for SpeedRoute

Reviews:

Brands by name

Popular brands

2N SpeedRoute, User Manual

Search results

Summary of Contents for SpeedRoute

Reviews:

Brands by name

Popular brands