42 / 51
www.selea.com
“Keep the command connection active”:
it prevents the FTP server from terminating the connection after the snapshot has
been received, asking that the login initially completed by the camera is kept active, so that less operations may be required
at the next forwarding. This function is fully supported by Selea CPS (with several other FTP servers the communication will be
interrupted after some time).
“Passive mode”:
to enable passive connection mode.
“Active mode data port”:
enter the connection port for active mode.
“File name format”:
it entails an automatic system for allocating names to snapshots, or for the customisation of the path and
name of the same through the use of TAGS (which can be selected using the appropriate key on the right of the field).
IP notification
Alarm notifications are forwarded to the
IP
that
the user enters in the appropriate field, using
one of the available protocols. It is possible to
notify two servers at the same time (
ServerA
and
ServerB
).
HTTP GET/POST:
iZero sends requests to the CGI
web server in the typical formats of the selected
protocol (GET or POST from the drop-down
menu).
TCP/IP:
iZero establishes a connection with
the indicated IP. As soon as the connection is
established, it forwards data based on the model in
the field on the right.
By pressing
“A”
shown in the figure below, it is possible to pre-load standard models that are valid for most situations. In case
of needs, by pressing the appropriate key on the page it will be possible to add further
TAGS
.
In the example in the figure, the address could be a possible server listening on port
80
.
http://192.168.1.120:80/notifica.cgi?param=$VALUE$
IP address
service name
on web server
placeholder parameter
port
The
$VALUE$
placeholder will be replaced with the text in the field on the right, which can be fully customised based on the
needs of the interaction software.
It must be noted that the text entered in the
“model”
field is forwarded in
ASCII
format. If necessary, it is also possible to
forward
UTF8
coded text by ticking the appropriate
“flag”
.
HTTPS certificate
: allows you to upload the https
certificate of the reference server; in this case, the
connection will take place only after verifying the
identity of the server by comparing the declared
certificate and the one inserted in the camera.
Summary of Contents for SELEA iZero
Page 1: ...iZero User Manual...
Page 47: ...47 51 www selea com...
Page 48: ...48 51 www selea com NOTES BY THE INSTALLER...
Page 49: ...49 51 www selea com...
