19
2N TELEKOMUNIKACE a.s., www.2n.cz
3.
4.
5.
6.
7.
In multiple-module assemblies connect the boxes, placing the basic module to
the left and the extending modules to the right. The interconnecting cable shall
be connected later!
Install blank modules on the unused side holes as shown in Figure previous step.
If you are installing a roof module, put it on the wall now.
Fix
on the wall with screws. Carry the supply cables (Ethernet, lock,
2N Helios
®
power cables) to the basic module box through one of the holes. Seal the screw
hole carefully with some cement or non-aggressive silicone to avoid water
infiltration.
Warning
Never remove the main board or camera electronics from under the
lower cover while installing
. Do not disconnect the
2N Helios
®
camera flat cable from the main board. Do not bend and press upon
the flat cable either.
Summary of Contents for Helios Vario
