2N TELEKOMUNIKACE a.s., www.2n.cz
17/92
No other tool is needed for DIN rail installation. The DIN rail bracket has a standard
size of 35 mm. Put the upper inner side of the bracket profile on the DIN rail and push
its bottom side to make the bracket click and fit to the DIN rail. Now all you have to
do is slide
from the top into the bracket profile (A) and fit its
2N EasyGate IP
®
position with a screw (B).
Wall Installation
Use the bracket and two dowels with screws included in the package to install 2N
®
on a wall. Drill holes in a selected place and selected height of the wall
EasyGate IP
and insert the dowels. Pass the screws through the bracket holes and screw them into
the dowels in the wall. Now all you have to do is slide
from the top
2N EasyGate IP
®
into the bracket profile (A) and fit its position with a screw (B).
