2N Telekomunikace 2N Indoor Compact User Manual Download Page 78

Page: 78 / 131

2N TELEKOMUNIKACE a.s., www.2n.cz

78/131

3.2.5.4 Auto Provisioning

2N Indoor Compact

helps you update firmware and configuration manually or

automatically from a selected TFTP/HTTP server storage according to predefined

rules.

The TFTP and HTTP server addresses can be configured manually. 2N Indoor

supports automatic address identification via the local DHCP server (Option

Compact

66).

My2N / TR069

Use this tab to enable and configure remote device management via the TR-069

protocol. TR-069 helps you reliably configure the device parameters, update and back

up configuration and/or upgrade device firmware.

The TR-069 protocol is utilized by the My2N cloud service. Make sure that TR-069 is

enabled and Active profile set to My2N to make the device work with My2N properly.

Only then the device will be able to log in to My2N periodically for configuration.

This function helps you connect the device to your ACS (Auto Configuration Server).

In this case, the connection to My2N will be disabled in the device.

My2N / TR069 Enabled – enable connection to My2N or another ACS server.

Summary of Contents for 2N Indoor Compact




































































































































Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands

2N Telekomunikace 2N Indoor Compact, User Manual

Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands