2N Telekomunikace 2N Indoor Compact User Manual Download Page 118

Page: 118 / 131

2N TELEKOMUNIKACE a.s., www.2n.cz

118/131

Status and Description

User Actions

Navigation

Actions and Result

DND Mode

The device is at relax, the side buttons are backlit to the

maximum, the other buttons are off. The doorbell icon is red.

Display Directory

Press the left-

hand upper

button at the

icon

The list of all available

devices is displayed.

Display Call list

Press the left-

hand lower

button at the

icon

The list of all

accomplished calls is

displayed.

Disable DND

mode

Press the right-

hand upper

button at the

icon

DND is deactivated,

the doorbell icon

turns white.

Display Settings

Press the right-

hand lower

button at the

icon

The Settings section is

displayed.

Summary of Contents for 2N Indoor Compact




































































































































Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands

2N Telekomunikace 2N Indoor Compact, User Manual

Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands