2N Telekomunikace 2N Indoor Compact User Manual Download Page 62

Page: 62 / 131

2N TELEKOMUNIKACE a.s., www.2n.cz

62/131

3.2.4.1 Audio

2N Indoor Compact

is equipped with a speaker. Set the phone call and state

signaling volume control in this configuration section.

controls the

Master Volume

general device volume including call volume, signaling tone volume, and so on.

Consider the noise level of the ambient environment while setting this parameter.

List of Parameters

Call Volume – set the phone call volume.

Ringtone Volume – set the incoming call ringtone volume.

Call-Progress Tone Volume – set the dialtone, ringtone and busy tone volume
levels. In case the call progress tones are automatically generated by the PBX,
this setting will not be applied.

Summary of Contents for 2N Indoor Compact




































































































































Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands

2N Telekomunikace 2N Indoor Compact, User Manual

Search results

Summary of Contents for 2N Indoor Compact

Reviews:

Related manuals for 2N Indoor Compact

Brands by name

Popular brands