20
06
Mount the receiver at the end of the servo tray as
show.
21
If you choice our
“ATP SR40 260KV”
BL motor. Or
Hacker B40 motor. Please check there two differ pair
mount hole on the motor, so please check the direction
with this mount screw hole with fire wall and ensure
the motor wire was on the low side in side the Fuse.
See PIC.22
22
23
Very important please check this point before you
mount the motor in anyhow.
If you choice other motor please ensure the mount
screw will not too long to damage the motor.
Mount the motor inside the Fuse. As show with the
motor mount screw that supply with the combo kit.
