28
08
please check that on place that spinner open hole for
prop. Will not hit the prop in any place. If there any
place has a hit. Please trim the spinner hole before you
install the spinner and use.
IMPORTANT NOTICE: IF THE SPINNER HIT THE
PROP. WHEN PROP. WAS RUNING SUCH HIGH
SPEED WAS VERY DANGEROUS. WILL CAUSE
SOME ONE GET KILL…!!!!!
29
Fix the spinner and prop. When you fix the prop.
Please check the spinner edge should be having a bit
space with the Fuse. That should be around 0.5mm.
30
Install power plug as show if you use same as the
sample.
31
Connecting motor and ESC. plug together also
connecting signal lead to receiver throttle CH. then
connection the battery to ESC.
Then check the direction of prop. turn, if prop turn
wrong direction you can set your ESC or just reverse
any two motor wire with ESC. to fix it.
(before you connecting
the battery to receiver must turn on the Radio and put
throttle stick all way low as well as the trim)
