10
Decorative detailing
wing/body detail:
Using the narrow 1/2" edge binding, position
it on top of the seam between the body and
the wing. It will follow the line from the
edge of the wing down to the tail, dividing
the wing from the tail. See diagram 7. It
goes from reinforcement C to reinforcement
E. Stitch both sides.
Edge binding
,
part 2
Finish the rest of the edge binding so that the entire bird is outlined.
Spreader sleeves
These go on the
BACK
of the kite. Follow the method for the spine. Center
the sleeve between the wing tip and the spine. The sleeve does not span the entire distance.
Diagram 8 shows their position.
