Upon first use please fully charge the headset. This will take about 2
hours. Please charge the headset in time to extend the battery life.
(If the headset has not been used for a longer period or the battery is
completely discharged it will take some minutes until the charging
indicator will work)
Charging the Charging-box
Connect the included Micro-USB cable with
the charging port of the box and with an
USB-Charger or PC.
Micro-USB
port
Note 1:
Check the charging device is suit to the headset.
Note 2:
Use only the supplied charger to charge the headset.
Note 3:
Do not attempt to open the built-in battery forcibly as this
could damage the headset.
Note 4:
If left unused, a fully charged headset will lose its power
automatically. It is recommended to charge the headset each
three months.
Note 5:
Do not leave the headset in a too hot or too cold surrounding.
Obey the validation for this product or the maintenance
condition (best between -20
℃
and 60
℃
) which may affect the
headset’s operations although it is fully charged.
Note 6:
Do not dispose the headset to fire or water.
Turning ON the Headset
Method 1
: In OFF MODE, press and hold MFB for 3 seconds to
turn on.
Method 2
: Pick up the headsets from the charging base to turn on
automatically.
Turning OFF the Headset
Method 1:
In ON MODE, press and hold MFB for 5 seconds to turn
off.
Method 2
: Put them back and close the charging base to turn off
automatically.
Pairing the headset with a phone
Make sure the headset is in OFF-mode and the distance between
the phone and the headset is no more than one meter. Activate the
Bluetooth-function on your phone then.
Method 1
Pick up the two headsets from the charging base to power on
and waiting for 10 seconds , the two headsets will enter auto-
pairing mode.
The two headsets connect with each other after few seconds, the
headset (R) alternately flashing red and blue, and then open the
phone's bluetooth device to search.
Choose „2GO BT3“ to connect your devices with each other.
