Method 2
:
In OFF-mode, press MFB key for 3 seconds to power on and
waiting for 10 seconds , the two headsets will enter auto-pairing
mode. The two headsets connect with each other after few
seconds, the headset (R) alternately flashing red and blue, and
then open the phone's bluetooth device to search
Choose „2GO BT3“ to connect your devices with each other.
Note : If the connection between the phone and the headset will be
lost, it will reconnect automatically when both are in operation
range again.
Answering a call
In standby-mode, you can answer the call by shortly pressing MFB of the
headset(R) or answering the call on your phone directly.
Ending a call
In call-mode, you can end the call by shortly press MFB of the headset(R)
or ending the call on your phone directly.
Rejecting a call
Press and hold MFB of headset(R) for 2 seconds to reject the call, the
speaker prompts “beep” twice and “call reject”.
Re-Dial
In standby-mode or music playing-mode, shortly press MFB twice to
redial the last phone number. The speaker prompts "beep" twice and
"redial".
Music Play/Pause
In standby-mode, shortly press MFB to play music.
On music playing-mode, shortly press MFB to PLAY music, press
MFB again to PAUSE music.
Resetting the Headset
On OFF MODE, press MFB button for 10 seconds :
OFF MODE
→
ON MODE(2 seconds)
→
Turn off with indicator flashing
red for 4 times(5 seconds)
→
Delete pairing Record(10 seconds) , until
hearing the Beep voice for 3 times, and the red/blue light flashes twice
at the same time.
Maintenance
Do not use abrasive cleaning solvents to clean the headset.
Do not allow the headset to touch with any sharp objects as this will
cause scratching and damage
Please keep the headset away from high-temperature, humidity
and dust.
