2E BASIS RD863-400, Operation Manual, Page: 24 / 32

24
EN
1
2
3
4
5
6
好
边
. 3 5 HDD
. . . 1 3 5 HDD 2 5 SSD
. 2 5 SSD
. . . 1 3 5 HDD 2 5 SSD
板 板 1 12CM 1 8CM 9CM
5 – 5.25’’ ODD installation.
Place the ODD at the indicated location and
secure with screws.
6. Установка
2.5″
SSD. / Встановлення
2.5″
SSD. / SSD
2.5″
installation.
7. Установка
VGA.
/ Встановлення
VGA.
/ VGA installation.
8. Установка вентиляторов . / Встановлення вентиляторів . / Case fans installation.
6 – VGA installation.
Disconnect the PCI plug (from the back panel)
and install VGA, then secure.
7 – Case fans installation.
Install the fans in the indicated locations in the
саse: rear panel, front panel. Secure the fans.
8 – I/O Ports, buttons, indicators.
OPERATING CONDITIONS AND PRECAUTIONS
1) Ensure that you have all the necessary parts before start to use case.
2) It`s important to use gloves during assembling and prevent injures of your hands.
3) Don`t use additional efforts when you fix components to prevent damage of case or case mounting.
4) Make sure that all components of the product are intact and functioning properly.
5) Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface damage.
6) Store and operate out of the reach of children and pets.
STORAGE, TRANSPORTATION AND UTILISATION
1) Transportation of product in original packing to avoid damages.
2) If components are already were installed in cases, please check how securely they are fixed
or remove it before preparation of case for transportation.
3) Avoid contact with moisture or water on the surface or inside of case to prevent corrosion
of material.
4) Utilization of case and it`s packing in accordance with utilization regulations in your country.