247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
and 2 are connected to the event marker labeled “Recording” and “Video Lost”. Digital Output 3 and 4 can be
connected to external LEDs inside the vehicle using the mDVR510x sensor/alarm cable harness.
You can also control the LED mode by clicking on the “Mode” drop menu and selecting either flashing by
interval, on or off when the event occurs.
5.6.15.
MOTION SENSITIVITY
When using recording mode “trigger by motion”, this option lets you adjust the motion sensitivity from the
video being captured. Values range from 1 to 7, 1 being the lowest sensitivity and 7 being highest sensitivity.
5.7.
SENSOR CONFIGURATION MENU
The mDVR510x provides 6 digital inputs standard and 6 additional digital inputs optional for a total
maximum of 12 digital inputs. The digital inputs are used to connect to any sensors that are available in your
vehicle. You can assign a unique name to all sensors listed in the menu. Shown in the menu are the factory default
settings. The sensor name will be recorded on your video file if OSD (On-Screen-Display) is enabled.
“Inverted” defines how the sensor should work. For instance, if you check the box “Inverted” then the
mDVR510x detects “0” as the active state of the sensor. If the check box is un-checked then the mDVR510x
detects “1” as the active state of the sensor. Please make sure you understand how your sensors work before
connecting them to the digital inputs.
5.7.1.
SENSOR NUMBER
36
