247Security mDVR 500 Series User Manual Download

Page: 24 / 57

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com

5.3.

CONNECTING TO DVR

Once the DVRViewer application is running click on the play button and selects “Live View”. You will get the

following window:

Select the DVR you want to connect to so that it’s highlighted and then click on “Connect” button.

5.4.

SETUP LOGIN

In this section, we will discuss how to configure the mDVR510x to meet your requirements. The process is

straightforward and easy to follow; the DVR setup is divided into six major components: SYSTEM, CAMERA,

SENSOR, NETWORK, STATUS and TOOLS. The system will already have been configured at the factory for your

specific system requirements, but of course can be updated as needed.

You can access the SYSTEM CONFIGURATION by clicking on the “SETUP” button from the DVRViewer application

and login in using the default username and password of “admin” and “admin”.

Summary of Contents for mDVR 500 Series

























































Search results

Summary of Contents for mDVR 500 Series

Reviews:

Related manuals for mDVR 500 Series

Brands by name

Popular brands

247Security mDVR 500 Series, User Manual

Search results

Summary of Contents for mDVR 500 Series

Reviews:

Related manuals for mDVR 500 Series

Brands by name

Popular brands