background image

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA  30022,  USA  | 1-866-693-7492   | www.247securityinc.com

 

 

 

 

The bit rate is also pre-set from the manufacturer to the default setting of 1 Mbps. Changing this setting will 

increase or decrease the picture quality, the smaller the bit rate the smaller the file size but less picture quality; 

the bigger the bit rate the bigger the file size and better picture quality. 

 

5.6.8.

 

 PICTURE QUALITY 

 

 

 

The picture quality is also pre-set from the manufacturer to the default setting of “high”. Changing this setting will 

increase or decrease the picture quality, the smaller the picture quality the smaller the file size but less picture 

quality; the higher the picture quality the bigger the file size and better picture quality. 

 

5.6.9.

 

 BRIGHTNESS, CONTRAST, HUE AND SATURATION 

 

 

 

Each camera input can be individually adjusted for Brightness, Contrast, Hue and Saturation to enhance the 

recorded video based on the location of the camera. Values range from 1 to 10, 1 being the lowest and 10 being 

highest. 

5.6.10.

 

TRIGGERS 

33 

Summary of Contents for mDVR 500 Series


























































Reviews: