background image

9

TM

TUB RACK ASSEMBLY MANUAL

2 Year Warranty

23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing 

or workmanship including materials.

Exclusions

The above warranty is limited to manufacturing and materials defects. Not including damage 

caused by misuse or abuse, wear and tear, condensation, extreme weather, accidents, incorrect 

set up, damage caused by mould, insects, animals or children. This also excludes broken poles 

and damage caused by a jammed, snagged zipper or excessive force applied to zipper causing 

failure. 

Consumer rights

Our goods come with guarantees that cannot be excluded under Australian law. You are entitled 

to a replacement or refund for a major failure and for compensation for any other reasonably 

foreseeable loss or damage. You are also entitled to have goods repaired or replaced if the 

goods fail to be of acceptable quality and failure does not amount to a major failure.

* Due to our policy of continual product development, the specifications, colours and features 

may vary.

Making a claim

To make a claim in relation to the above manufacturers warranty please ensure you retain your 

sales receipt of purchase. Please contact us stating the nature of your claim and we will be in 

touch with you shortly. If you require additional assistance, please phone 03 9547 4691 to dis-

cuss and arrange your claim. Product subject to warranty will be sent to 23ZERO Australia, 32b 

Eileen Rd. Clayton South, Victoria 3169. All freight costs associated with return of product for 

assessment is payable by consumer.

Summary of Contents for TUB RACK













Reviews: