GENERAL WARNINGS
Read thoroughly and stick closely to the instructions and
warnings. Always remove the plug from the socket before
carrying out any maintenance or clearing of the appliance.
SINGLE PHASE models are supplied complete with cable
and plug for connection to the socket.
TREE PHASE models are provided with a cable which must
be connected to the mains by a qualified electrician or a
skilled installation technician. Any tempering with the ma-
chine or connections not complying with the above indica-
tions invalidate the manufacturer’s guaranty.
PARTICULAR WARNINGS
Never tamper with the machines anyway. For all interven-
tions or tampering on the machines, always apply to the
authorized centre service. Never pull the power cable to
remove the plug from the socket. Only use the appliance
for the purposes it is meant for. Position the appliance a
minimum of 5 cm from walls so as to allow good aeration.
Keep the appliance away from sinks and water. Never leave
unattended the machine switched on. Keep the appliance
away from children and incompetent persons.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Use only original accessories and parts.
To avoid the danger of fire, never cover the appliances. Un-
plug the appliance from the mains when it is not in use. Let
the appliance to cool down before moving it. In the interest
of safety, the appliances must always be considered as live.
The motor is equipped of a thermal sensor that switch off
the feeding when high temperatures are reached. If this
happen unplug the machines from the mains and let it cool
down, then contact technical staff.
Do not repair by yourself.
If the coffee grinder is to remain inactive for a long period,
clean it carefully, dry the top container and leave it open.
INSTRUCTIONS
COFFEE GRINDER DOSER M80-Q50-Q13
Appliances to ground coffee beans.
ATTENTION:
Moving parts.
OPERATION INTERVAL OF THE MACHINE
Respect the following cycle of use of the machine: If the
supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in
order to avoid a hazard.
30s ON / 6 min. OFF - (20s ON / 6 min. OFF mod. Q50).
OPERATION
Before inserting the plug in the socket or the main switch
upstream from the machine, ensure that the switch on the
machine is on position “0”.
Insert the shutter that closes the container and check that
it slides in its seat. Fit the container in its seat, pressing at
the side with your fingers until it is firmly in place. Then fix
it to
the ring nut of milling regulation with the appropriate
screw supplied with the apparatus, match the hole on the
beans container with the one on the ring nut.
If your coffee grinder ha san automatic switch, check
that the lever is in the position indicated. The coffee
grinder is now ready for work.
Pour the coffee beans into the top container. Open the
shut-ter. Insert the plug in the socket or turn on the main
switch upstream from the machine, then turn the machine
switch to position “I”. For security issues, the customer not
have to remove any type of screw on the coffee grinder.
This op-eration is only concurred by qualified technicians
and after detached the apparatus from the feeding net.
Check the grain size of the ground coffee; each grinder is
set for medium-fine grain. If you’re not satisfied with this
re-sult you must proceed as follows:
COFFEE GRINDER DOSER M80-Q50:
1)
touch
the ring nut pawl downwards
2) Turn the ring nut to the LEFT for finer grain or to the
RIGHT for coarser grain
(Fig. 4)
.
To avoid the removal of the metal ring with the consequent
possibility to have free access to the milling group, place the
screw in one of the two holes allowing the widest regulation.
COFFEE GRINDER DOSER Q13:
Turn the ring nut to the LEFT for finer grain or to the
RIGHT for coarser grain
(Fig. 5)
.
ADJUSTING THE QUANTITY DELIVERED:
To adjust the quantity, turn the adjusting nut. Turn to the
LEFT to increase the quantity, to the RIGHT to decrease it.
The dosing device can deliver from 4 gr to 9gr.
To set the amount you want, take 10 doses (ten pulls of the
lever) from the doser and weight the coffee that comes out,
in this way you can calculate the weight of each dose.
M80 - Q13 “
ELECTRONIC
” VERSION
Warning: to stop the provision of coffee
press
any of
the 5 keys of display.
Operation
1. before inserting the plug in the socket or turning on the main
switch upstream from the machine, ensure that the switch on
the machine in on position “0”. Insert the shutter that closes the
top container and check that it slides in its seat.
Fit the container in its seat,
pressing
at the side with your
fingers until it is firmly in place, then fix it to the ring nut of
milling regulation with the appropriate screw supplied with
the apparatus, match the hole on the beans container with
the one on the ring nut.
The coffee grinder is now ready for work. Pour the coffee
beans into the top container. Open the shutter and insert
the plug in the socket, then turn the machine switch to posi-
tion “I”. Now the display will be ignited visualizing the written
“READY”; the grinder is ready to erogate the required doses
(from one to three) or to be programmed. Put the door filter
in the appropriate staple and then is possible to proceed
with the distribution of the milled coffee in this way:
- single dose:
press
the button with a cup
- double dose:
press
the button with two cups
- triple dose:
pressing
key with 3 cups
GB
27
