Rest for 5 minutes before
measuring.
Wait at least 3 minutes between
measurements. This allows your
blood circulation to recover.
For a meaningful comparison,
try to measure under similar
conditions. For example, take daily
measurements at approximately
the same time, position of upper
arm, or as directed by a physician.
Tie the cuff
1
.Tie the cuff on your upper arm,
then position the tube off-center
toward the inner side of arm in
line with the little finger.
2
.The cuff should be snug but not
too tight. You should be able to
insert one finger between the
cuff and your arm.
3
.Sit comfortably with your tested
arm resting on a flat surface.
2~3cm
.Patients with Hypertension:
The middle of the cuff should be
at the level of the right atrium of the heart;
Before starting measurement, please sit
comfortably with legs uncrossed,
feet flat on the floor, back and arm supported.
4
1
.When the Arm Blood Pressure Meter is off, press the “START/STOP”
button to turn on it, and it will finish the whole measurement.
(Take user A for example.)
Adjust to zero.
LCD display
Inflating and measuring.
Display and save the
measurement results.
Start the Measurement
2
.Press the “START/STOP” button
to power off, otherwise it will turn
off within 1 minute.
Tips: Maximum 60 records are both for User A and User B.
Or position the artery mark
Φ
over
the main artery (on the inside of
your arm).Note: Locate the main
artery by pressing with 2 fingers
approximately 2 cm above the
bend of your elbow on the inside
of your left arm. Identify where the
pulse can be felt the strongest.
This is your main artery.
13
12
MEASUREMENT
MEASUREMENT
